Kitchen trolley Photo: From Handyman
Add the shelf boards
For the middle and base shelves, position the shelf boards in the frame rebates, working from the centre and trimming the end boards to fit. Remove to run a bead of construction adhesive along the frame rebates, replace the boards and leave to dry.
Make the housings
Mark the 75mm-wide shelf housings on the legs at the top, base and 320mm from the base. Set the mitre saw to cut 25mm deep, positioning an offcut along the fence for a full sweep of the blade to make a series of relief cuts in the housing.
Clear the housing waste
Knock out the loose timber between the housing cuts with a hammer, using a sharp chisel to clean out the base and checking the housing against the side of the shelf to widen if necessary.
Post A Comment
Comments are published and responded to (if required) on a weekly basis. For queries or comments about our Sweepstakes and product purchases from our online store, please call Customer Service on 0800 400 060 or email email@example.com. Comments containing personal or inappropriate material may be modified or removed at our discretion.
Where would you love to travel this year?
|NEW: Saturday Links|