Sponsored By
How to change the blade on a circular saw
Good circular saw technique makes stronger joints when working with 140x140 mm posts.
Share it
Related Stories
Unplug the saw, open the guard and wedge the teeth into a timber offcut. Depress the blade lock on the motor side to undo the bolt
with a flat socket wrench. Replace the blade and tighten the bolt.
SQUARE THE BLADE
Most saws have an adjustment screw to keep the blade square to the baseplate. Set the blade to maximum, retract the guard and position a square against the base and blade, tightening the screw when they’re 90º to each other.
|
| ||||||
Post A Comment
| Name* | |
| Email* | |
| Comment* | |
Comments are published and responded to (if required) on a weekly basis. For queries or comments about our Sweepstakes and product purchases from our online store, please call Customer Service on 0800 400 060 or email customerservice.nz@readersdigest.com. Comments containing personal or inappropriate material may be modified or removed at our discretion.
.jpg)
.jpg)
.jpg)
Have You Seen...
 Life Well Shared |  Embrace Life |  Embrace Life |  Food & Recipes |  Embrace Life |  Entertainment |
| Important Information |  | ||||
|---|---|---|---|---|---|
| Customer Care | |||||
| | |||||
 | WIN! WIN! |
 | Shop at our store!• Books • DVDs • Music • Gifts |
|
|
